Camelot Technology Uther v2.0 D/A processor

666uher2c_2.jpgThe apparent demise of Audio Alchemy left a niche in the marketplace for a supplier of innovative, high-value digital components to provide the less-than-wealthy audiophile with state-of-the-art technology. Although Camelot Technology existed before Audio Alchemy went away, they have quickly taken over this niche with some interesting components. And I understand that some of the former AA technical personnel consulted for Camelot in the development of these products. (A recent press release indicates that Genesis Technology also played a major role in their design.)

While one cannot completely ignore the heritage of some of these products, it would be unfair to treat Camelot as Audio Alchemy reincarnated. These are newly-thought-out components that are, for the most part, considerable advances over their predecessors. Also, they are part of a program of product development that is moving them still further from that older line.

The devices under consideration here constitute a complete CD system:

The Merlin I is a relatively low-cost CD transport, based on a Sony mechanism, that offers S/PDIF, AES/EBU, and—be still, my heart—I2S outputs (footnote 1). As such, it seems a ready replacement for my Audio Alchemy DDS•Pro transport. All my listening experience indicates that, all else being equal, simply changing from any single line interface to I2S results in an improvement in the reproduced sound. Plugging the Merlin into the Camelot components (Dragon and Uther) or into the Audio Alchemy components (DTI and DDE 3) confirmed this: with either, the I2S link gave a more relaxed spatial rendition, with better differentiation of music and ambience. Not that the Camelot and AA components sounded the same; rather, they distinguished between the interfaces in the same ways.

[Editorial note: we were informed by Camelot during the preparation of this review that the Merlin I is no longer available, and will be replaced by the Merlin Pro, which uses a Pioneer "Stable Platter" mechanism. We have therefore retained KR's comments on the Merlin only where they throw light on the other two products.—Ed.]

In terms of complexity and sophistication, the Uther v2.0 DAC goes well beyond anything that AA had offered, and still provides I2S connections compatible with AA and Camelot devices.

The Uther v2.0 is the big gun of the Camelot line, and it certainly projects a macho image right from the faceplate. The protruding middle section has "Camelot" emblazoned in its center, surrounded by four hefty square buttons for power, mode, and other functions (selection of one of eight inputs, gain control, dither mode, etc.). Flanking this section are two of the most prominent alphanumeric displays I've ever seen on a piece of domestic audio equipment. Read them from across the room? I think you can read them from across the street. Along with six LEDs, they provide the user with lots of important control information. Like the Dragon Pro, the Mk.2 version of the Uther will redress some of these problems with a smaller name imprint, a 17" width, and a much-needed blanking option for the displays. Six-pin I2S connectors will be added as well.

The Uther is provided with a remote control that will also control the Dragon Pro jitter reducer if they are connected with the Royal Bloodline (see below). It also comes with a separate power-supply "brick" that connects to the 10 local voltage regulators in the main chassis. There is the option of a battery power supply for the powerfully fastidious.

The jitter-reducing input stages of the Uther, similar to those in the Dragon, feed a Pacific Microsonics PMD-100 digital filter. Aside from its HDCD-decoding capability, the PMD-100 has the ability to implement eight different dither modes; the Uther is, I believe, the first consumer DAC to give the user full access to all of them. You can even A/B two dither settings with the remote! I tried all eight modes and settled on the factory setting as most useful with most CDs. However, the eighth dither setting, TPDF (Triangular Probability Density Function), was especially forgiving in softening the edgy Hindemith recording mentioned above. The variable dither settings may also be a useful EQ tool for fine-tuning system character.

The Uther has two pairs of Burr-Brown PCM-63 converter chips for fully differential and balanced A/D conversion. While the B-B PCM-1702, with comparable specs, was supposed to supplant the PCM-63 several years ago, this venerable (in digital terms) device is still preferred by many engineers and listeners. Multiple bypass caps and trimmers for balance and offset surround the PCM-63s.

The analog output stage is discrete, provides single-ended and balanced outputs, and, mirabile dictu, contains an analog-domain volume/balance control accessible from the remote. The volume/balance steps are accomplished by switching in/out discrete metal-film resistors, all nicely lined up on a daughter board and isolated from the digital circuitry. If you have only digital sources (and that's what this world is coming to), the Uther is both your DAC and your control center.

Sound Quality
All its myriad control and connection possibilities aside, how does the Uther sound? In a word, super. Fed by the Dragon Pro or directly from the transport, the Uther was smooth on the top end, clean and balanced in the voice range, and possessed of considerable slam on the bottom. For the past few months the Dragon/Uther has become my preferred D/A combo, and I've run all my test CDs through them with great success. As I write this, I'm listening to the Dragon/Uther directly driving (no preamp!) a Simaudio Moon W-5 amp and a pair of PMC IB-1S speakers, and to a remarkable recording of Sallinen's Symphonies 2 and 6 (BIS CD-511). It is not just a courtesy that the percussionist, Gert Mortensen, is given top billing on this CD's cover. His contributions, particularly on timpani in the last movement of the 6th, were reproduced powerfully and articulately by the Camelot components. Yet there was no artificial spotlighting, and the rest of the orchestra and the ambience were beautifully balanced.

Comparisons? Forget the Audio Alchemy DDE v.3; it was outclassed, as it should be, by the much more expensive Uther. Face-offs between the DDS•Pro/Dragon/Uther with the Sonic Frontiers SFCD-1 were curiously dependent on sources and on the rest of the system. With the Apogee Duettas and the DNA-1, the bass from the Camelots could be a bit overripe, emphasizing a room/speaker resonance to a degree not experienced before. On the other hand, the SFCD-1 educed no such problems with this combination, and seemed slightly more forgiving and natural with female voices. The new Diana Krall CD (Love Scenes, Impulse! IMPD-233) made both of these effects quite apparent right from the opening cut.

On the other hand, the SFCD-1 was less extended in the bass when auditioned with the EOS Signature/Bass Modules and the McCormack DNA-1. The magnitude of these differences, however, was quite small, and noticeable primarily with direct A/B comparisons. Besides, if you want to savor a slightly different flavor, try another dither setting on the Uther.

Okay, okay. What didn't I like about the Camelot components? Well, their appearance didn't suit my taste, but each person can judge this for himself. Moreover, Camelot will be improving this in their Mk.2 versions. I was also annoyed by Camelot's adherence to RCA jacks, even though gold-plated, for all the coaxial digital connections. Surely, at this point in the digital era, some or all of these should be BNCs. Finally, the quality of the printed overlay on the Uther remote is a little tacky.

But all of this amounts to a hill of beans when considered with the performance one gets from the Camelot components. The Dragon Pro should become the new standard for anti-jitter processing, and the Uther 2.0 is simply the best DAC I've used to date. Together, they sounded great, have immense flexibility in configuration, and do not require a preamp or controller. Adding up the prices, they may not be the most cost-effective one-time purchase—one can buy other Class A-rated CD players for less. On the other hand, just add an amp and speakers and you're on your way to wonderful sound.

Footnote 1: The I2S bus is a proprietary digital-audio-data interconnection standard intended by its progenitor, Philips, to be used inside a CD player or digital control center. As it runs a separate connection for the data clock signal, it is much less prone to introducing jitter into the recovered clock than the S/PDIF and AES/EBU data standards, in which the clock is embedded in the data and needs to be extracted.—John Atkinson
Camelot Technology
30 Snowflake Road
Huntingdon Valley, PA 19006-1518
(215) 357-8356